Mobile Equipment Units
| 250 SCFM Blower Package 250 SCFM blower package designed to extract chlorinated and non chlorinated hydrocarbons. 20 gallon gas/liquid separator with auto drain, air filter, Sutorbilt positive displacement blower, 7.5hp electric motor, v-belt drive, exhaust silencer, SCH 40 carbon steel piping, air to air heat exchanger, and a UL listed NEMA 4 control panel control panel. |
 |
| 100 SCFM Electric Catalytic Oxidizer 100 SCFM electric catalytic oxidizer designed to extract and treat non chlorinated hydrocarbons. 20 gallon gas/liquid separator with auto drain, Sutorbilt 3L positive displacement blower, 7.5hp electric motor, v-belt drive, exhaust silencer, SCH 40 carbon steel piping, 100 SCFM electric catalytic oxidizing chamber, exhaust stack, trailer mounted with 4 leveling jacks. UL Listed NEMA 4 control panel. Honeywell 3 pen chart recorder. |
 |
| 250 SCFM Electric Catalytic Oxidizer 250E is a all electric catalytic oxidizer with a gas/liquid separator w/auto drain, Sutorbilt 4L positive displacement blower, 10hp electric motor, v-belt drive, exhaust silencer, SCH 40 carbon steel piping, max flow 300 SCFM electric catalytic oxidizing chamber with two stage catalyst designed for 99% DRE, exhaust stack, skid mounted. UL listed NEMA 4 control panel. Honeywell 3 pen chart recorder. |
 |
| 250 SCFM Thermal Catalytic Oxidizer Stealth Firecat 250 SCFM thermal catalytic oxidizer designed to extract and treat non chlorinated hydrocarbons. 30 gallon gas/liquid separator with auto drain, Roots 56 U-RAI positive displacement blower, 10hp electric motor, v-belt drive, exhaust silencer, SCH 40 carbon steel piping, flame arrestor, primary air burner, double block and feed AGA approved fuel train, 250 SCFM electric catalytic oxidizing chamber, exhaust stack, skid mounted. NEMA 4 control panel. Four pen chart recorder. |
 |
| 5 HP High Vacuum Unit 5hp High Vacuum Multi Phase Extraction Skid designed to extract liquids and gases from the subsurface utilizing a liquid ring high vacuum pump. The skid should be interfaced with a thermal / catalytic oxidizer, electric catalytic oxidizer, or activated carbon to treat the extracted gases. The skid must be interfaced with a water storage and/or treatment system. Base system consist of a single stage high efficiency, oil seal liquid ring vacuum pump, All iron construction with bronze impeller and Viton seals, 5hp 230/460VAC three phase TEFC direct drive motor, Air cooled heat exchanger with fan guard, Oil separator/reservoir with sight level gauge, Automatic temperature control valve, Temperature gauge, high temperature switch, low and high oil level switch, Vacuum relief valve, Inlet check valve, Inlet vacuum gauge, gas / liquid separator with auto drain and UL listed NEMA 4 control panel mounted on a common skid. |
 |
| 250 SCFM Thermal Catalytic Oxidizer Stealth Firecat 250 SCFM thermal catalytic oxidizer. 30-gallon gas/liquid separator with auto drain, Sutorbilt 4L positive displacement blower, 10hp electric motor, v-belt drive, exhaust silencer, SCH 40 carbon steel piping, 250SCFM oxidizing chamber, exhaust stack. NEMA 4 control panel. 3 pen chart recorder. Supplemental fuel required natural gas or propane. |
 |
